Epson Stylus Pro 7890 - Page 22

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
The Control Panel
22
PAPER SKEW CHECK ON ❏ ON:
If the paper is not straight, an error message
appears on the LCD panel and the printer stops
printing.
❏ OFF:
A paper align error does not occur even if the
printed data is out of range of the paper, and the
printer continues to print.
This setting is available for roll paper only.
OFF
REFRESH MARGIN ON When you select ON, the printer cuts an extra print area
automatically after borderless printing.
OFF
AUTO NOZZLE CHECK ON: PERIODICALLY The printer performs a nozzle check and if there are
missing dots, it performs cleaning automatically.
❏ ON: PERIODICALLY
Automatically performs a nozzle check periodically.
❏ ON: EVERY JOB
Performs a nozzle check before printing each job.
❏ OFF
Does not perform a nozzle check automatically,
except for some operations.
ON: EVERY JOB
OFF
PRINT NOZZLE PATTERN OFF When you select ON, the printer prints the nozzle check
pattern before printing each print job or the 10th sheet,
depending on the setting you have set.
This setting is available for roll paper only.
ON: EVERY PAGE
ON: EVERY 10 PAGES
CHANGE BLACK INK MANUAL This function is enabled when printing to paper that
supports both matte black and photo black ink.
Select between automatically switching black ink
(AUTO) or not automatically switching black ink
(MANUAL) when switching the type of black ink from the
printer driver.
When AUTO is selected, the printer automatically
switches to the type of black ink set in the printer driver,
even if the type of black ink set in the printer driver and
the printer itself do not match.
A confirmation message is displayed when MANUAL is
selected. If you choose to continue printing, the printer
switches to the type of black ink specified in the printer
driver, and then performs the printing operation.
When printing to paper that has a specific type of
supported black ink, you cannot set the type of black
ink from the printer driver regardless of this setting. You
must set the type of black ink that is compatible with
your paper from the printer's control panel before
printing. See “Changing the Black Ink” on page 60
AUTO
INITIALIZE SETTINGS EXECUTE You can return all setting values you have made in the
PRINTER SETUP menu to their factory set value.
Item Parameter Explanation