Epson Stylus Pro 7890 - The Control Panel; Maintenance Mode

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
The Control Panel
29
Maintenance Mode
You can change the language or unit used on the
display or return all the setting values to their
factory default.
A
Turn off the printer by pressing the
button.
B
Press both the button and the
button at the same time to turn on the
printer.
Refer to the "Maintenance mode list" on the
right for details.
The setting procedures are the same as
those for the Menu mode.
See “Using the Menu mode” on page 16
C
To exit the Maintenance mode, press the
button to turn off the printer.
Maintenance mode list
Item Parameter Explanation
LANGUAGE JAPANESE You can select
the language to
be displayed on
the LCD panel.
ENGLISH
FRENCH
ITALIAN
GERMAN
PORTUGUE
SPANISH
DUTCH
KOREAN
CHINESE
LENGTH UNITS METRIC You can select a
unit of
measurement to
use to display
length.
FEET/INCH
TEMPERATURE
UNITS
°C You can select
the unit of
temperature
displayed on the
LCD panel.
F
ROLL PAPER
TENSION
1 - 5 You can change
the maximum
value of Roll
Paper Tension.
SS CLEANING EXECUTE You can perform
ultrasonic head
cleaning.
DEFAULT
PANEL
EXECUTE You can set all
setting values you
made in the
Menu mode to
their factory set
value.
AUTO
CLEANING
TIMES
1 - 3 The number of
times to perform
auto cleaning
when a clog was
detected after
performing an
auto nozzle
check.
CUSTOM 0 - 255 You can make
custom settings.