Epson Stylus Pro 7890 - Page 142

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Printing Varieties
142
C
In the Poster Settings screen, select the
number of pages you want in the poster.
D
Select borderless poster printing or poster
printing with margins, and then select any
pages that you do not want to print.
When borderless is selected:
Select Borderless Poster Print.
When with margins is selected:
Clear Borderless Poster Print.
E
Check other settings, and then start
printing.
Note:
❏ If Borderless Poster Print is grayed out,
the selected paper or the size does not
support borderless printing.
See “Supported Media Sizes for
Borderless Printing” on page 131
See “Paper Information” on page 162
❏ If Single Cut or Double Cut is selected as
the Auto Cut setting, the length of the paper
is shortened by 1 or 2 mm and the joins do
not fit together perfectly.
Select Off or Normal Cut. See
“Borderless printing” on page 130
Note:
Regarding the size after joining together:
When Borderless Poster Print is cleared and
printing with margins is selected, the Print
Cutting Guides items are displayed.
The finished size is the same whether or not Trim
Lines is selected. However, if Overlapping
Alignment Marks is selected, the finished size is
smaller with an overlap.