Epson Stylus Pro 7890 - Page 146

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Printing Varieties
146
Making Settings in Windows
A
When the printer driver's Main screen is
displayed, click User Defined.
See “Print Settings” on page 54
B
In the User Defined Paper Size screen, set
the paper size you want to use, and then
click Save.
❏ You can enter up to 24 single-byte
characters for the Paper Size Name.
❏ You can easily change the size by
selecting a defined paper size close to
the size you want to set from Base
Paper Size.
❏ If the length and width ratio is the same
as a defined paper size, select the
defined paper size from Fix Aspect
Ratio and select either Landscape or
Portrait for the Base. In this case, you
can only adjust either the paper width
or paper height.
C
Click OK.
You can select the paper size you saved
from Size on the Paper Settings screen.
You can now print as normal.
Making Settings for Mac OS X
A
When the Print screen is displayed, select
Manage Custom Sizes from the Paper Size
list.
When using Mac OS X 10.4, or if items on
the Page Setup screen are not displayed on
the Print screen due to the application
being used in Mac OS X 10.6 or 10.5, display
the Page Setup screen and make settings.
Note:
You cannot select User Defined if Sheet is
selected as the Source and Borderless is selected
as Paper Settings.
Note:
❏ To change the paper size you saved, select
the paper size name from the list on the left.
❏ To delete the user-defined size you saved,
select the paper size name from the list on the
left, and then click Delete.
❏ You can save up to 100 paper sizes.