Epson Stylus Pro 7890 - Page 40

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Paper Handling
40
E
Load the sheet into the paper insertion slot.
F
Make sure that the right and bottom edges
of the sheet are straight and in line with the
set line.
If you have difficulty adjusting the thick
paper, adjust the paper suction by pressing
the or button.
G
Press the button.
After a few seconds, the paper moves to the
start position. If you press the button,
it moves at once.
H
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the or button to
select NO and then press the button. Set
the media type and paper remaining, and
then press the button to set the media.
The previous setting appears on the LCD
panel. If the media type and paper
remaining are correct, select YES and then
press the button.
I
If you use the paper basket, set it in the
forward position.
See “Using the paper basket and paper
guides” on page 42