Epson Stylus Pro 7890 - Page 44

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Paper Handling
44
C
Move the paper guides to the vertical
position, and then bring the front basket
back as far as it goes.
D
Bring the front paper basket up and fasten
it with the hook-and-loop fastener straps.
Be sure to fasten the hook-and-loop
fastener upward.
E
For Epson Stylus Pro 9890/9908, switch the
position of the rear paper basket depending
on the paper size.
If the paper is A1 or smaller:
Lift both the front and rear baskets as
shown below.
If the paper is larger than A1 size:
Tilt the rear basket until parallel to the floor
during printing.
Tilt the front basket until parallel to the
floor when ejecting your prints.
Note:
If you are concerned about the print quality
when printing on Doubleweight Matte Paper
or Enhanced Matte Paper, try to set the paper
guides in the front direction.