Epson Stylus Pro 7890 - Page 56

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Basic Settings
56
D
Check that this printer is selected, and then
set the paper size.
In Paper Size, select either of the following
depending on the loaded paper. XXXX is
the actual paper size, such as A4.
XXXX: Print with margins on roll paper.
Prints using the margin set in Roll Paper
Margin from the Menu. See “PRINTER
SETUP” on page 21
XXXX (cut sheet): Print with margins on cut
sheets. Margins are 3 mm on the top, left,
and right, and 14 mm on the bottom.
When performing borderless or banner
printing See “Borderless printing” on
page 130, “Banner printing (on roll paper)”
on page 148
E
Select Print Settings from the list, and then
set each item.
Set the Media Type, Color, or Print Quality
according to the paper feed method for the
paper loaded in the printer (for cut sheets).
Normally, you can print correctly just by
setting items in the Print Settings screen.
F
When settings are complete, click Print.
Note:
When using Mac OS X 10.4, or if items on the
Page Setup screen are not displayed on the Print
screen due to the application being used in Mac
OS X 10.6 or 10.5, follow the steps below to
display the Page Setup screen.
From the File menu of the application, click
Page Setup.