Epson Stylus Pro 7890 - Page 63

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Options and Consumable Products
63
Auto Take-up Reel Unit
(for Epson Stylus Pro
9890/9908)
C12C815321 Auto Take-up Reel Unit is
for Epson Stylus Pro
9890/9908 only. You
cannot use with Epson
Stylus Pro 7890/7908. See
the Auto Take-up Reel
Unit Setup Guide for
installing it.
See the following section
to use Auto Take-up Reel
Unit.
“Using Auto Take-up
Reel Unit (For Epson Stylus
Pro 9890/9908 only)” on
page 46
SpectroProofer Mounter
44"
(for Epson Stylus Pro
9890/9908)
C12C890521 See the SpectroProofer
Mounter 24"/44" Setup
Guide and User’s Guide
for details.
SpectroProofer Mounter
24"
(for Epson Stylus Pro
7890/7908)
C12C890531
Roll Media Adapter C12C811241 See the following section
for details.
“Using Roll Paper” on
page 31
Note:
❏ When using the USB connection and a USB hub, we recommend that you connect the printer to the first hub
connected directly to the computer. Also, some hubs may cause unstable operation. If problems occur, connect the
printer directly to the USB port of the computer.
❏ When using an Ethernet connection, use a LAN cable. When using a 100BASE-TX STP (shielded twisted-pair)
cable, it should be Category 5 or higher.
Name Product Code Explanation