Maintenance and Transportation
120
Jamaica
Long.bk Rev. C
A5 size MAINT.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Setting up the printer after transporting it
The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the
Assembly and Setup Instructions
, and note the following points:
❏ Do not forget to open the side ink valve locks. The printer
cannot print while they are closed.
❏ Do not forget to remove any protective material (such as tape
from the ink cartridge clamps).
❏ The first time you start printing after transporting the printer,
the print head nozzles may be clogged. EPSON recommends
you perform a nozzle check and clean the print heads, and
also realign the print heads to ensure print quality. See your
Startup Guide.
❏ EPSON recommends installing new ink cartridges after
transporting the printer. If you reinstall the cartridges you
removed before transporting, the printer cannot determine
the correct level of remaining ink and the Ink Out lights may
not flash to warn you when a cartridge is almost out of ink.
To Next Page
Loading...
