Epson Stylus Pro 9000 - Printer Port Setting Does Not Match the Printer Connection; Port (Windows); The Printer Driver Doesnt Have Enough Available; Memory (Macintosh)

Troubleshooting
127
Jamaica
Long.bk Rev. C
A5 size trble.fm
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Printer port setting does not match the printer connection
port (Windows)
If you use Windows, select the printer port as described below.
1. Click
Start
, point to
Settings
and select
Printers
.
2. Right-click
EPSON Stylus Pro 9000
in the Printers window,
then select
Properties
.
3. Click the
Details
tab.
4. Make sure that your printer driver is selected in the
Print using
the following driver
list. Then select the port to which your
printer is connected in the
Print to following port
list.
The printer driver doesn’t have enough available
memory (Macintosh)
To increase the available memory in your Macintosh, select
Control Panel
from the
Apple
menu and double-click the
Memory
icon. You can increase the size of RAM cache or virtual
memory to increase total available memory. Also quit all
unnecessary applications.
The printer sounds like it is printing, but nothing prints
Try one or more of these solutions:
❏ Make sure the ink valve locks on each side of the printer are
open. Ink cannot flow when these are closed. See
“Transporting the Printer” on page 115.