Epson Stylus Pro 9000 - Your EPSON Printer Is Not Selected as the Default Printer

Troubleshooting
126
Jamaica
Long.bk Rev. C
A5 size trble.fm
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
❏ Turn off the printer and computer. Make sure the printer’s
interface cable is securely plugged into the correct terminal of
the computer.
❏ Make sure the interface cable specifications match the
specifications for the printer and computer.
❏ Make sure the interface cable is directly connected to the
computer without passing through any device, such as a
printer switching device, or extension cable.
❏ If you are using Windows NT 4.0, try uninstalling the
EPSON
Printer Port
. Click
Start
, point to
Programs
and
EPSON
Printers
, then click
EPSON Printer Port Uninstall
. Follow the
messages on the screen.
Your EPSON printer is not selected as the default printer
Install the printer driver if it is not installed already, and follow
the steps below to select your EPSON printer as the default
printer.
For Windows:
1. Click
Start
, point to
Settings
and select
Printers
.
2. Right-click
EPSON Stylus Pro 9000
in the Printers window.
3. Select
Set As Default
, then close the Printers window.
For Macintosh:
1. Click
Apple
menu and select
Chooser
. If the
EPSON Stylus
Pro 9000 printer
icon can be seen, the printer driver is
correctly installed.
2. Make sure the
EPSON Stylus Pro 9000 printer
is selected for
the printer port.