EasyManua.ls Logo

Epson Stylus Pro 9000 - Page 140

Epson Stylus Pro 9000
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
140
Jamaica
Long.bk Rev. C
A5 size trble.fm
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
4. Carefully pull down the jammed paper. TURN PWR OFF AND
ON is displayed on the LCD panel.
5. Close the lower cover, if necessary, then press the
Power
button to turn the printer off and back on.
6. Make sure that the Paper Out light is on and LOAD PAPER is
displayed on the LCD panel. To load paper see “Using Roll
Paper” on page 81 or “Using Cut Sheet Media” on page 93.
Note:
When you install two roll paper spindles, secure the roll paper that you
are not using with the roll paper belt packed with your printer. See
“Using the roll paper belt” on page 91.
If you do not resume printing afterwards, make sure the print
heads are in the home (far right) position. If not, turn the printer
on, wait until the print heads move to the home position, then
turn off the printer.

Table of Contents

Other manuals for Epson Stylus Pro 9000

Related product manuals