Epson Stylus Pro 9000 - Page 25

The Control Panel
25
Jamaica
Long.bk Rev. C
A5 size CONTP.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
3. Press the
Item
button.
PAPER THICK = STD
appears. When
you want to print on EPSON media, leave this setting as STD.
When you want to print on non-EPSON media, enter the
thickness value of the paper in 0.1 mm increments by pressing
the + or - button.
4. Press the
Enter
button to register your value.
ADJUST. PATT.
= ALL
appears.
5. If you want to print all the adjustment patterns, press the
Enter
button. If you want to print a single adjustment pattern,
press the + or - button until the pattern number (#1, #2, #3...)
that you want to adjust appears. Then press the
Enter
button.
The printer starts printing all the adjustment patterns or the
selected pattern.
Note:
It takes 25 minutes or less to print all the adjustment patterns. Use
of 1.5 m roll paper is necessary.
Head alignment pattern examples:
Patterns #1-5, #7, and #9-12
1
2
3
4
5
6
7