9
❏
If the paper is curled, make sure to flatten it or curl it slightly
toward the opposite side before loading. Printing on curled
paper may smear your printout, especially when printing
with
Maximum
selected as the Printable Area setting.
❏
If ink smears on your documents when printing on thick
media, move the adjust lever to the “+” position. To change
the setting, open the front cover and position the lever as
shown in the illustration.
Note:
❏
Return the adjust lever to the “0” position before printing or
copying using media of normal thickness. Leaving the lever in
the “
+
” position may cause gaps in the printed image.
❏
When the adjust lever is in the “+” position, make sure the High
Speed setting in the printer driver’s Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
To Next Page
Loading...
Need help?
General
