10
About special media cleaning sheets
Cleaning sheets packaged with EPSON special media should not
be used with the Stylus Scan. The cleaning function performed by
these sheets is not needed, and the sheets could jam in the Stylus
Scan.
Loading Envelopes
When printing on envelopes, please note the following:
❏
You can load up to ten envelopes at a time into the paper
feeder.
Note:
The folding quality and thickness of envelopes vary widely. If the
total thickness of the stack of envelopes exceeds ten millimeters, press
the stack flat before loading.
❏
Set the adjust lever to the “
+
” position. To do this, open the
front cover and reposition the lever.
Note:
❏
Return the adjust lever to the “0” position before printing or
copying using media of normal thickness. Leaving the lever in
the “
+
” position may cause gaps in the printed image.
❏
When the adjust lever is in the “+” position, make sure the High
Speed setting in the printer driver’s Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
To Next Page
Loading...
Need help?
General
