B
Set Number of panels in the Poster dialog box.
C
Select whether to print the poster with or
without borders.
When borderless is selected:
Select Borderless Poster Print.
Note:
❏ If Borderless Poster Print is grayed out, the
selected paper or the size does not support
borderless printing.
U “Supported Paper” on page 96
❏ If Auto Cut is set to Single Cut or Double
Cut, the image is cut 1 to 2 mm inside the
edge of the image, which means the image
may misalign at the joins.
When with margins is selected:
Clear Borderless Poster Print.
Note:
Regarding the size after joining together:
When Borderless Poster Print is cleared, the
Print Cutting Guides items are displayed.
The finished size is the same whether or not Print
page frames is selected. However, if Overlapping
Alignment Marks is selected, the finished size is
smaller with an overlap.
D
Check other settings, and then start printing.
Joining poster sheets with borders in multi-page
printing
If Overlapping Alignment Marks is selected, join
guides (indicated by the lines drawn through and
around the X marks in the illustration below) will be
printed on each sheet.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Various Printing Methods
105
To Next Page
Loading...
Need help?
General