Sleep mode is cleared if a print job is received or a
button on the control panel is pressed.
You can set the time before entering sleep mode from
1 to 120 minutes. At default settings, the printer enters
sleep mode if no operations are performed for 15
minutes. You can change the Sleep Timer in “General
Settings”.
U “General Settings” on page 147
Note:
When the printer enters sleep mode, the control panel's
screen goes blank as if the power has been turned off,
but the power light remains on.
Power Off Timer
The printer is equipped with a Power Off Timer
option that automatically turns the printer off if no
errors occur, no print jobs are received, and no control
panel or other operations are performed for a set
period of time. You can set the time until the printer
automatically turns off from 30 minutes to 12 hours.
The factory default setting is Off. You can perform
Power Off Timer from the “General Settings” menu.
U “General Settings” on page 147
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Introduction
25
To Next Page
Loading...
Need help?
General