Epson SureColor T-Series - Page 104

Epson SureColor T-Series User’s Guide
More Ways to Print
104
1
Ready the two top sheets and trim the excess
from the left sheet by cutting along the line
joining the two join guides (the centers of the X
marks).
2
Lay the upper left sheet on top of upper right
sheet. Lineup the X marks as shown in the
illustration below, and temporarily fasten them
using an adhesive tape on the back.
3
With the two sheets overlapping, trim the excess
by cutting along the line joining the two cut
guides (the lines to the left of the X marks).
4
Rejoin the two sheets.
Use an adhesive tape to stick the backs of the
sheets together.
5
Repeat Steps 1 to 4 for the lower sheets.