Epson SureColor T-Series User Manual

32
You see a screen like this:
3. Select Router > Start Setup or Change Settings> Push Button Setup (WPS).
4. Follow the instructions on the LCD screen to complete WPS setup.
5. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software from the Epson website.
Note: If you don't see the icon, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
Before you begin, make sure paper is loaded in the product.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Network Settings > Network Status.

Epson SureColor T-Series Specifications

General

Brand	Epson
Model	SureColor T-Series
Category	Printer
Language	English