158
Setting Options Description
Platen Gap 1.2
1.6
2.1
Adjusts the distance between the print head
and the paper; displayed when Custom
Paper is selected as the Paper Type setting
Paper Suction -4 to +3 Select this to adjust the distance between the
paper and the print head. Choose lower
values for thinner papers.
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded; displayed when Custom
Paper is selected as the Paper Type setting .
Select Off if a paper setting error occurs when
paper is correctly loaded.
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Auto Cut On
Off
Select On to automatically cut roll paper after
each page is printed, or select Off to cut paper
manually
Remove Skew On
Off
Select On to enable paper skew reduction
Parent topic: Using the Control Panel Menus
Related tasks
Loading Roll Paper
Creating Custom Paper Configurations
Selecting the Paper Settings for Each Source - Control Panel
Related topics
Cutting Roll Paper
Basic Settings Menu
Select Settings > General Settings > Basic Settings to customize various display and power settings.
To Next Page
Loading...
Need help?
General