Epson SureColor T-Series - Specifications Table

Epson SureColor T-Series User’s Guide
Appendix
201
Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle
configuration
Black: 360 nozzles x 2 rows x 2
colors (Photo Black and Matte
Black)
Color: 360 nozzles x 2 rows x colors
(Yellow, Magenta, and Cyan)
Resolution
(maximum)
2880×1440 dpi
Control code ESC/P raster (undisclosed
command)
HP-GL/2, HP RTL
*1
Media feed
method
Friction feed
Built-in memory 1GB for Main
Network Functions IPv4, IPv6, WSD, IPsec/access
control, SSL communication,
IEEE802.1X
Rated voltage AC 100 to 240 V
Rated frequency 50 to 60 Hz
Rated current 1.0 to 0.5 A
Power consumption
In use T7270: Approximately 64 W
T5270: Approximately 60 W
T3270: Approximately 52 W
T7270D: Approximately 65 W
T5270D: Approximately 61 W
Ready mode T7270/T5270/T3270:
Approximately 16 W
T7270D/T5270D: Approximately 17
W
Sleep mode 3.0 W or less
Power off 0.5 W or less
Temperature Operating: 50 to 95 °F (10 to 35 °C)
Storage (before unpacking):
-4 to 140 °F (-20 to 60 °C) (within
120 hours at 140 °F (60 °C), within a
month at 104 °F (40 °C)
Storage (after unpacking):
-4 to 104 °F (-20 to 40 °C) (within a
month at 104 °F (40 °C))
Humidity Operating: 20 to 80% (without
condensation)
Storage (before unpacking): 5 to
85% (without condensation)
Storage (after unpacking): 5 to 85%
(without condensation)
Operation temperature/humidity (when the hard disk unit
or Adobe PostScript 3 Expansion Unit has not been
connected)
Operation temperature/humidity (when the hard disk unit
or Adobe PostScript 3 Expansion Unit has been
connected)
Printer Specifications