140
Enter the folder path name for the Location setting in one of the following formats depending on
the Communication Mode setting you selected:
• SMB: \\host name\folder
• FTP: ftp://host name/folder name
Enter additional connection information as needed.
12. To add the contact to the frequently used contacts list, select Assign to Frequent Use.
13. Select OK.
Parent topic: Creating Scanning Contacts
Related tasks
Creating a Shared Network Folder
Registering Contacts for Email, Network Folder, or FTP Scanning - Web Config
You can register a list of contacts for scanning to email, a network folder or an FTP server using Web
Config and your computer's internet browser. You can create a total of 200 contacts and groups
combined.
Before you begin, print a network status sheet and locate the IP address for your product on the sheet.
Note: These instructions use Internet Explorer as an example browser.
1. Start Internet Explorer on a computer that is using the same network as your product.
2. Type your product's IP address into the address bar and press Enter.
3. Click Continue to this website (not recommended).
4. Click Scan/Copy > Contacts.
5. Select the number you want to use for the contact you are adding and click Edit.
6. Select Email, Network Folder (SMB), or FTP as the Type setting.
7. Enter the following information for the contact:
• Name: The name to display in your product's contact list.
• Index Word: Enter a word to identify this entry when searching for it (up to 30 characters). This
field is optional.
• Assign to Frequent Use: If you want to identify the contact as a frequently used address, select
On. This makes it quicker to select the contact when you scan.
To Next Page
Loading...
Need help?
General