Epson SureColor T-Series - (T7270 D;T5270 D Only); Removing Roll 2

Epson SureColor T-Series User’s Guide
Basic Operations
35
4
Open the roll paper cover.
5
Raise the roll lock lever.
6
Holding the paper by the roll adapters, move the
roll to the roll rest.
7
Lift the adapter lock levers to release the roll
paper adapters.
8
Remove the roll paper adapters.
After rewinding the roll paper carefully, store it
in the original package.
Close the roll paper cover.
Removing Roll 2
(T7270D/T5270D only)
This section describes how to remove and store roll
paper of Roll 2 after printing. The pressure rollers may
leave impressions on paper that is left in the printer.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.