Epson SureColor T-Series - Page 36

Epson SureColor T-Series User’s Guide
Basic Operations
36
Buttons that are used in the following settings
1
Confirm that the printer is ready and press the
( button.
The Load/Remove Paper menu will be
displayed.
2
Press the d/u buttons to highlight Remove
Paper and press the Z button.
If roll paper is also loaded on Roll 1, select Roll
2, and then press the Z button.
If On is selected for Roll Paper Remaining, the
printer will automatically print a barcode.
3
The paper will automatically be rewound.
After the paper is rewound, a beep tone sounds.
4
Lower the paper basket to the horizontal
position.
U“Adjusting the Position” on page 50
5
Hold the drawer handles of Roll 2 unit, and then
pull the unit out.
6
Raise the roll lock lever.
7
Move the roll paper to the roll rest on top of the
printer.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.