Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
12
This command is effective only for check scanner mode.
During card scanner mode, this command is not available.
When the CHK_DI_SHARPNESS_IMAGE command of
DirectIO method is set, the set value with this command is not
reflected to the read images.
Returned value One of the following is returned and stored in the ResultCode
property.
Value Meaning
OPOS_SUCCESS DirectIO succeeded.
OPOS_E_CLOSED The device is closed.
OPOS_E_NOTCLAIMED The device is not claimed.
OPOS_E_DISABLED The device is disabled.
OPOS_E_ILLEGAL Specifies command number without a
function and the pre-scanning cannot be
executed.
The current reading mode does not support
this command.
OPOS_E_EXTENDED The paper is not inserted.
Other Refer to the ResultCode item.
Requirement Open, Claim & Enable
To Next Page
Loading...
