Epson TM-H6000III

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
4
2.5 Port Information
This section explains the port information for each device.
1) Port information when using serial port
The port information that can be set with the SetupPOS utility is as follows.
Setting Information
Effective Setting Range
Baud rate 4800, 9600, 19200, 38400
Bit length 7 bits, 8 bits
Parity NONE, ODD, EVEN
Stop bit 1 bit
Handshake DTR/DSR
Output buffer length 32-1024
Output interval time 0-9999
The default settings are as shown in the following table.
Setting Information Effective Setting Range
Baud rate 19200
Bit length 8 bits
Parity NONE
Stop bit 1 bit
Handshake DTR/DSR
Output buffer length 1024
Output interval time 2500
All CheckScanner settings are exactly the same as the printer.
2) Port information when using parallel port
All CheckScanner settings are exactly the same as the printer.
3) Port information when using USB port
All CheckScanner settings are exactly the same as the printer.
4) Port information when using Ethernet port
All CheckScanner settings are exactly the same as the printer.