Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
2
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
CheckScanner devices.
2.1 Device Information
The DeviceDescription and DeviceName for each model are as follows.
Model Name
I/F DeviceDescription DeviceName
S EPSON TM-H6000III Scanner TM-H6000III
P EPSON TM-H6000IIIP Scanner TM-H6000IIIP
U EPSON TM-H6000IIIU Scanner TM-H6000IIIU
TM-H6000III
E EPSON TM-H6000IIIE Scanner TM-H6000IIIE
I/F indicate the connected interface.
The following is the list of the four connecting interfaces.
S: Serial
P: Parallel
U: USB
E: Ethernet
2.2 References of Firmware Versions
Please refer to the release notes (Relnote.txt).
2.3 Settings of DIP Switches and Hardware
There are no Dip Switch settings for the CheckScanner.
Please refer to the
settings of the Printer.
To Next Page
Loading...
