Epson TM-H6000III Development Guide

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
1
Section 1. Introduction
This manual describes the method of use and related items, including device-specific
precautions, when the CheckScanner device is used with EPSON OPOS ADK.
Before the CheckScanner can be used, the EPSON OPOS ADK should be installed and
the devices to be used should be set using the SetupPOS utility. For setting methods,
please refer to the Section 2 of this manual.
This manual applies to the following devices.
EPSON TM-H6000III with Scanner
Hereafter, throughout This manual, the various model names will be referred to as
“TM-H6000III”.
Compatibility mode
The compatibility mode for upward compatibility was added in OPOS Ver2.60.
For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE Compatibility Mode”.

Epson TM-H6000III Specifications

General

Dimensions (WxDxH)	186 x 298 x 185 mm
USB port	Yes
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Type	POS printer
Print speed	63 lps
Character size	0.99 x 2.4 mm
Print technology	Dot matrix
Safety	UL, CSA, TÜV
Certification	VCC1, FCC, CE
Country of origin	China
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80 mm
Printing media thickness	60 - 90 µm
Ethernet LAN	No
Input current	1.8 A
Power supply type	DC
Pallet width	800 mm
Pallet height	1675 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	40 pc(s)
Quantity per pallet (UK)	50 pc(s)
Quantity per pallet layer	8 pc(s)
Quantity per pallet layer (UK)	10 pc(s)
Package depth	382 mm
Package width	285 mm
Package height	305 mm
Package weight	6600 g
Quantity per pack	1 pc(s)