Epson TM-H6000III Development Guide

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
39
Section 7. Warnings
z The CheckScanner settings follow the same hydra connection settings as the
master device EPSON TM series printer. Please refer to the Section 7 of
"EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM Series)” for further information.
z Do not set the input and output buffers below the minimum 32 bytes.
z The EPSON TM series CheckScanner’s EndInsertion method readies the
printer to receive a check. This setting may take a time. During this time,
all devices connected by hydra settings are frozen. (For example, the
display marquee stops.)
z During MICR mode (waiting receive a check), using the Claim method on any
hydra devices (except the CashDrawer) will return an error.
z When you use CHK_DI_ROTATE_IMAGE on the DirectIO method, the size
of the same image data may be different depending on whether the rotation
setting is turned on.
z During a scan operation, the state of the hydra device cannot be known
immediately. For example, as long as the scan operation is not completed,
opening the cover does not cause status to rise against any hydra device.
z When the tracing mode is specified, contents of the ImageData property
cannot be written in the log file. This is because the amount of data is too
large. In this case, the message below is written in the log file.
“
Data was returned normally. The contents cannot be checked here.“

Epson TM-H6000III Specifications

General

Dimensions (WxDxH)	186 x 298 x 185 mm
USB port	Yes
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Type	POS printer
Print speed	63 lps
Character size	0.99 x 2.4 mm
Print technology	Dot matrix
Safety	UL, CSA, TÜV
Certification	VCC1, FCC, CE
Country of origin	China
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80 mm
Printing media thickness	60 - 90 µm
Ethernet LAN	No
Input current	1.8 A
Power supply type	DC
Pallet width	800 mm
Pallet height	1675 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	40 pc(s)
Quantity per pallet (UK)	50 pc(s)
Quantity per pallet layer	8 pc(s)
Quantity per pallet layer (UK)	10 pc(s)
Package depth	382 mm
Package width	285 mm
Package height	305 mm
Package weight	6600 g
Quantity per pack	1 pc(s)