Epson TM-H6000III

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
32
RC = CheckScanner1.DirectIO (Command, Data, Dummy)
If RC = OPOS_SUCCESS Then
‘Success
Else
‘Error
End If
5.2 Specifying the Reading Area
In CheckScanner, you can set the data area to read using EndInsertion.
The sample program on extended function setting of EndInsertion is shown
below.
Dim RC As Long
Dim Command As Long
Dim Data As Long
Dim Dummy As String
Command = CHK_DI_READ_AREA
Data = 0
Dummy = "0, 500, 1000, 1500"
RC = EPSONCheckScanner1.DirectIO (Command, Dummy, Data)
If RC = OPOS_SUCCESS Then
‘Success
Else
‘Error
End If