Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
3
2.4 Setting of Devices
The SetupPOS utility should be used for setting devices. Regarding how to
use
the SetupPOS utility, please refer to the "EPSON OPOS ADK MANUAL User's
Manual (Installer/ SetupPOS/ TMUSB)".
1) Setting of Parallel interface devices
When the SetupPOS utility is used to select the device when using a Parallel port,
select devices with “P” appended to the end of the device name.
Example: TM-H6000IIIP
2) Setting of USB interface devices
When the SetupPOS utility is used to select the device when using a USB port,
select devices with “U” appended to the end of the device name.
Example: TM-H6000IIIU
3) Setting of Ethernet interface devices
When the SetupPOS utility is used to select the device when using an Ethernet
port, select devices with “E” appended to the end of the device name.
Example: TM-H6000IIIE
4) Device Specific Settings
Not applicable
To Next Page
Loading...
