Epson TM-L100 Setup Guide

11
Setup Using a Computer Connected Using SimpleAP
Use SimpleAP to connect the printer to your computer, and then use TM-L100 Utility to set the network
connection.
Prepare the following items.
• Computer: Windows 11/10/8.1/8/7 (A computer with wireless LAN capability)
• Setup utility: TM-L100 Utility
• Wireless LAN unit: OT-WL06
Follow the procedure below to set the network connection.
1
Connect the wireless LAN unit (OT-WL06) to the printer.
2
Turn on the computer.
3
Start the printer in the SimpleAP mode.
If the wireless LAN connection is set to the default values (factory default), it will automatically start
in SimpleAP mode when the power is turned on and print the following.
If this is not printed as shown here, see
"Starting SimpleAP" on page 30 for more information.
4
Select [Start] - [EPSON TM-L100] - [TM-L100 Utility].
SimpleAP Start
SSID : DIRECT-TM-L100- XXXXXXXXXX
Encryption Type : WPA2-PSK
Passphrase : XXXXXXXXXX
IP Address : 192.168.192.168
MAC Adress : XX-XX-XX-XX-XX-XX

Epson TM-L100 Specifications

General

Brand	Epson
Model	TM-L100
Category	Label Maker
Language	English