Epson TM-L100

8
Setup Using a Computer Connected with a USB Cable
Use the included USB cable to connect the printer to your computer, and then use TM-L100 Utility to set the
network connection.
Prepare the following items.
• Computer: Windows 11/10/8.1/8/7
• USB cable: With a Type B connector required for connecting to the printer
• Setup utility: TM-L100 Utility
• Wireless LAN unit: OT-WL06
Follow the procedure below to set the network connection.
1
Connect the wireless LAN unit (OT-WL06) to the printer.
2
Connect the printer to the computer with a USB cable.
Connect the cable to the USB Type B connector on the printer.
3
Turn on the computer.
4
Turn on the printer.
5
Select [Start] - [EPSON TM-L100] - [TM-L100 Utility].