45
Chapter 2 Setup
7
Enter the password and select [OK] to log in to Web Config.
The default password is as follows:
You can find the serial number by running the self-test or on the nameplate attached to the printer.
To improve security, it is recommended to change the administrator password from the default pass-
word.
The password can be changed from [Advanced Settings] - [Product Security] - [Administrator
Password] in Web Config.
8
From the list of SSIDs displayed, select the SSID of the network you want to connect
to and select [OK] .
9
Enter your network password and select [OK].
When the Wi-Fi LED lights up, the connection is complete.
Password label Password
Attached on the product Printed on the label
Not attached on the product Serial number
(10-digit alphanumeric characters, case-sensitive)
To Next Page
Loading...
