Epson TM-m50II - Page 59

59
Chapter 3 Advanced Usage
Buzzer Control
Option Buzzer (model: OT-BZ20)
• Enable
• Disable (initial setting)
Buzzer Frequency(Error)
• Continuous (initial setting)
• 1 time
• No sound
Sound Pattern(Autocut)
Selectable from Patterns A to E
Initial setting: Pattern A
Buzzer Frequency(Autocut)
• 1 time (initial setting)
• No sound
Sound Pattern(Pulse 1)
Selectable from Patterns A to E
Initial setting: Pattern A
Buzzer Frequency(Pulse 1)
• 1 time (initial setting)
• No sound
Sound Pattern(Pulse 2)
Selectable from Patterns A to E
Initial setting: Pattern A
Buzzer Frequency(Pulse 2)
• 1 time (initial setting)
• No sound
Pre-feed before next print
• Enable
• Disable (initial setting)
• For information about how to connect the optional external buzzer, see "Connecting the
Optional External Buzzer" on page 34.
• When
the optional external buzzer is enabled, a cash drawer cannot be used. Be sure to disable
it when you use a cash drawer.
• When using this function, the top margin is approximately 10.5 mm.
•
This setting becomes invalid if you change the "Top Margin" setting from the initial setting (9.5 mm).