Epson TM-T20II

G
Configure the IP address of the printer on IP Address and then click the Next button. Proceed to Step 8.
When configuring the network setting after installing the driver, assign the printer driver port IP address you
configure here to the printer, or change the printer driver port IP address to the one that will be set to the
printer.
H
The Start Installation screen appears. The driver and utility to be installed are listed.
❏ Advanced Printer Driver Ver.5.xx
❏ TM-T20II Utility Ver. x.xx
❏ EpsonNet Config Ver. x.xx (Only for Ethernet connection)
❏ EpsonNet Simple Viewer (Only for Ethernet connection)
Click the Install button to start the installation.
TM-T20II Software Installer Software User's Manual
Installation
16