C
Click the Set button. The settings are reflected to the printer.
Serial
Configures the serial communication.
Setting Description
Communication speed: Selects the communication speed.
Parity: Configures the parity.
Data Bit: Configures the data bit.
Stop Bit: Configures the stop bit.
Flow control: Configures the flow control.
USB
Configures the USB class.
Note:
❏ When using the UPOS or Advanced Printer Driver Ver. 3.04, select Vender Class.
❏ When you do not need to use the Printer Class, using Vender Class is recommended.
TM-T20II Software Installer Software User's Manual
TM-T20II Utility
78
To Next Page
Loading...
