Epson TM-T88 User Manual

Setting Up the Printer 1-5
Das Kabel der Lade an die Schnappsteckerbuchse hinten am
Drucker neben dem Netßzanschluß
anschlie
ß
en
.
Grounding the Printer
You need a ground wire to ground your printer. Make sure that the
wire is AWG 18 or equivalent.
1. Make sure that the printer is turned off.
2. Connect the ground wire to the printer using one of the the FG
screws on the back of the printer, as shown.
Connecting the Power Supply
Use the optional EPSON PS-170 or equivalent power supply for
your printer.
DK
DC24V
FG
FG

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External