Epson TM-T88V-DT

Chapter 2 Preparing the setting file
19
2
Printer-%X%
(Firmware version
2.2 or later)
RetryInterval The communication retry interval is designated in units of
milliseconds.
This setting is ignored for this printer.
Integer between 100 and 60,000
WebContents Delete this item if you are not registering Web contents in
the printer.
AutoUpdate Designates whether to enable / disable automatic updates
for Web contents.
“Enable” / “Disable”
Frequency Designates the frequency for automatic updates.
“Hour” / “Daily” / “Weekly” / “Monthly”
Timing Designates the timing for automatic updates.
 This must be set if the value for "Frequency" is "Hour".
 This is ignored if the value for "Frequency" is "Daily".
 This must be set if the value for "Frequency" is "Weekly".
 This must be set if the value for "Frequency" is "Monthly".
 If the value for "Frequency" is "Hour", designate "1", "2", "3",
"4", "6", "8", or "12".
 If the value for "Frequency" is "Weekly", select "Sunday",
"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", or
"Saturday".
 If the value for "Frequency" is "Monthly", designate an
integer from 1 to 31.
UpdateTimeHour Designates the "hour" for the updates.
 This must be set if the value for "Frequency" is "Daily",
"Weekly", or "Monthly".
 This is ignored if the value for "Frequency" is "Hour".
Integer from 0 to 23
Section name Parameter
Description
Valid value