Epson TM-U200 Series

How to connect an Epson POS printer with Ethernet Interface
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
Home Sale Specials Printers Accessories Service Support About Us Contact Catalog
Printers
TM-
U220
TM-
U200
TM-
U295
TM-
U375
TM-
T88III
TM-
U88IV
TM-
T88V
TM-
U675
TM-
U590
TM-
H6000
Power
Supplies
Interface
Cards
Cables
Ribbons
Paper
How to connect an Epson POS Printer with an Ethernet Adapter
Overview
Installing Adapter
Checking Adapter Settings
Configuring Adapter
Installing Driver
Troubleshooting
Overview
An Ethernet connection uses the existing network to connect the computer to the POS printer. The printer plugs into
the LAN and, once configured, the computer can use the printer like it was attached directly.
Required Components
Epson POS Printer with Connect-It Ethernet adapter
Local Area Network (LAN) running TCP/IP
Windows computer with LAN connection
Epson Printers Covered
TM-T88III
TM-T88IV
TM-T88V
TM-U220
TM-U230
TM-U590
TM-U675
TM-H6000III
Step by Step Installation
The installation step vary slighting depending on the type of Ethernet card you have.
Over the past few years Epson has offered 3 types of Ethernet cards, Type II, II and IV.
Each has a different set of features and a different way of setting them up.
Type II

Epson TM-U200 Series Specifications

General

Brand	Epson
Model	TM-U200 Series
Category	Printer
Language	English

Summary

Epson POS Printer Ethernet Connection Guide

Overview of Ethernet Connectivity

Explains the Ethernet connection process for POS printers.

Ethernet Adapter Installation

Step-by-step guide for installing the Ethernet adapter.

Adapter Settings Verification and Configuration

How to check and configure adapter settings.

Printer Driver Installation Process

Guide for installing the necessary printer driver.

Troubleshooting Ethernet Setup Issues

Common problems and solutions for Ethernet connection.

Required Components and Printer Compatibility

Essential Hardware and Network Prerequisites

Lists required hardware and network setup.

List of Supported Epson Printers

Models of Epson printers covered by this guide.

Installation Procedure Overview

Understanding Ethernet Adapter Types

Introduces different Ethernet card types (II, III, IV).

Ethernet Adapter Types: Type III and IV Details

Type III Ethernet Adapter Information

Details specific to the Type III Ethernet adapter.

Type IV Adapter: Installation Steps

Specific installation steps for the Type IV module.

Type IV Adapter: Setup and Configuration

Guide to installing and configuring the Type IV adapter.

Printer DIP Switch Configuration

DIP Settings for TM-U200 U230 Series

DIP switch settings for TM-U200 and TM-U230 printers.

DIP Settings for TM-T90 L90 & J Series

DIP switch settings for specific TM series printers.

DIP Settings for Various TM-T88, TM-H, TM-U Models

DIP switch settings for diverse TM models.

Cabling and Initial Printer Testing

Connecting with a LAN Patch Cord

Instructions on using LAN patch cords for connection.

Performing a Printer Self-Test

How to perform a printer self-test for initial settings.

IP Address Management for Adapters

Changing the Ethernet Adapters IP Address

Procedure to change the adapter's IP address.

Resetting the Ethernet Adapter to Defaults

Procedure to reset the Ethernet adapter to factory defaults.

Configuring Computer IP for Adapter Access

Steps to configure computer's IP for adapter access.

Accessing Adapter Configuration via Web

Logging into Adapter with TMNet WebConfig

Accessing the adapter via web browser for configuration.

Configuring IP Address with TMNet WinConfig

Acquiring the TMNet Configuration Utility

Instructions on downloading the TMNet utility.

Running the TMNet Configuration Utility

Steps to execute the TMNet configuration utility.

Setting IP Address via TMNet WinConfig

Detailed steps for setting IP via TMNet WinConfig.

Ethernet Type II Module Configuration Details

Manual Setup for Type II Ethernet Module

Manual configuration for Type II Ethernet module.

Printer DIP Switch Settings and Testing

DIP Settings for TM-U200 U230 Series (Cont.)

DIP switch settings for TM-U200 and TM-U230 printers.

DIP Settings for TM-T90 L90 & J Series (Cont.)

DIP switch settings for specific TM series printers.

DIP Settings for Various TM Models (Cont.)

DIP switch settings for diverse TM models.

Printer Initial Settings and Test Printout Procedures

Confirming Initial Printer Configuration

Procedure to confirm initial printer settings.

Quick Test Printout for Type II Adapters

Steps for performing a quick test printout.

Test Printout for Printers Without Cover Sensor

Steps for test printout without cover sensor.

Ethernet Type III Module Configuration and Installation

Type III Ethernet Adapter Overview

Information on the Type III Ethernet adapter.

Type III DIP Switch and Jumper Configuration

DIP switch and jumper configurations for Type III module.

Setting Baud Rates for Type III Adapters

How to set baud rates for Type III module.

Initial Settings and Physical Installation Steps

Retrieving Initial Printer Settings

Performing printer self-test for initial settings.

Enabling DHCP on Ethernet Card

Information on enabling DHCP for the Ethernet card.

Physical Installation of Type IIIII Modules

Physical installation steps for Type II/III modules.

Interface Configuration and Computer Setup

Generating a Configuration Report

Steps to generate a configuration report.

Configuring Ethernet Interface Options

Methods for configuring the Ethernet interface.

High-Level Interface Configuration Methods

Various methods for high-level interface configuration.

Important Note on IP Address Assignment

Advice on setting permanent IP and DIP switch 8.

Computer Configuration and Driver Installation

Installing Windows Printer Drivers

Steps for installing printer drivers.

Downloading Latest Epson Printer Drivers

Guide to downloading drivers from Epson.

Computer-Based Configuration Tools

Utilizing the Epson Flash Utility

Using Epson Flash Utility for testing connectivity.

Printer Configuration within Windows

Configuring Printer Ports in Windows

Steps for configuring printer ports in Windows.

Disabling Bidirectional Port Support

Disabling bidirectional support for the port.

Printer Testing and Basic Troubleshooting

Executing a Printer Test Page

Performing a test print to verify installation.

Troubleshooting Network Connectivity Issues

Common issues related to network connectivity.

Adding and Configuring TCPIP Printer Ports

Using the Add Standard TCPIP Port Wizard

Wizard for adding TCP/IP ports.

Configuring the Standard TCPIP Port Monitor

Settings for TCP/IP port monitor.

Printer Driver Access and Testing

Accessing Printer Properties in Windows

Accessing printer properties via Control Panel.

Performing a Printer Test Print

Performing a test print to verify installation.

Comprehensive Printer Troubleshooting

Resolving Connectivity Problems

Network connectivity issues and their checks.

Troubleshooting Printing Failures

Solutions for when the printer stops printing.

Addressing Slow Printing Performance

Reasons and solutions for slow printing.

Advanced Troubleshooting Scenarios

Correcting IP Address Settings

Verifying IP address settings.

Verifying Subnet Mask Configuration

Verifying subnet mask settings.

Resolving Redundant IP Address Conflicts

Resolving IP address conflicts.

Addressing Printer Driver Installation Errors

Driver installation problems.

Additional Information and Support Resources

Epson Printer and Interface Details

Information about Epson printers and interfaces.

Finding Support and Help Resources

Where to find support and additional help.