Epson TM U295 - B/W Dot-matrix Printer User Manual

1-8 Installation
Connecting the Power Supply
This printer requires an external power supply. The EPSON Power
Supply PS-150 is recommended.
CAUTION:
Using an incorrect power supply can cause serious damage
to the printer.
1. Make sure that the power supply is turned off.
2. Plug the power supply’s cable into the printer’s connector as
shown below. Note that the flat side of the connector faces up.
TM-U295
TM-U295P

Epson TM U295 - B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	TM U295 - B/W Dot-matrix Printer
Category	Printer
Language	English