Using the Printer 2-1
Chapter 2
Using the Printer
The control panel has three buttons and three lights.
Buttons
All three of these buttons can be disabled or enabled by the ESC c 5
command.
RELEASE
Pressing this button moves the rollers so that paper can be inserted
or removed.
REVERSE
Feeds the paper backward based on the line feed amount set by
ESC 2 and ESC 3.
FORWARD
Feeds the paper forward based on the line feed amount set by
ESC 2 and ESC 3.
You can also use the
RELEASE
button to start a self test.
See Chapter 1 for details.
Indicator Lights
POWER
This light is on whenever power is supplied to the printer.
To Next Page
Loading...
