Epson TM U295 - B/W Dot-matrix Printer - TM-U295 DIP Switch Settings

1-16 Installation
TM-U295
Switch Function ON OFF
1 Data reception error Ignored Prints”?”
2 Receive buffer capacity 35 bytes 512 bytes
3 Handshaking XON/XOFF DTR/DSR
4 Word length 7 bits 8 bits
5 Parity check Yes No
6 Parity selection Even Odd
7
See Transmission Speeds table below.
8
9 Pin 6 reset signal Used Not used
10 Pin 25 reset signal Used Not used
Transmission Speeds
Speed in Bits per Second SW 7 SW 8
1200 ON ON
2400 OFF ON
4800 ON OFF
9600 OFF OFF