Krautkramer USN 52R/USN 52L Issue 05, 02/00 8-9
H Note:
Any measurement value that has been damaged in
memory is thus detected and “ERROR“ is transmitted
in its place. Damaged measurement values are not
used in calculating statistics.
8.5 Transferring measurement
values
Transferring measurements values in the Data
Logger to a PC
Measurements in the Data Logger can be transferred to
a PC via the RS 232 interface. The data are automati-
cally formated and transferred as an ASCII text file.
The utility program UltraDOC for Windows, offered as
an option, simplifies data transfer to a PC.
– Connect the RS 232 interface of the instrument with
the serial interface of your PC using the cable with
Order No. 13 647 from Krautkrämer. A corresponding
adapter is supplied for 9 pin serial interfaces.
Data transfer to a PC is made exactly the same as
described on the previous page concerning the transfer
of a report to a printer.
Transferring measurement values
Interfaces, Peripherals
Krautkramer USN 52R/USN 52L Issue 05, 02/00 8-9
H Note:
Any measurement value that has been damaged in
memory is thus detected and “ERROR“ is transmitted
in its place. Damaged measurement values are not
used in calculating statistics.
8.5 Transferring measurement
values
Transferring measurements values in the Data
Logger to a PC
Measurements in the Data Logger can be transferred to
a PC via the RS 232 interface. The data are automati-
cally formated and transferred as an ASCII text file.
The utility program UltraDOC for Windows, offered as
an option, simplifies data transfer to a PC.
– Connect the RS 232 interface of the instrument with
the serial interface of your PC using the cable with
Order No. 13 647 from Krautkrämer. A corresponding
adapter is supplied for 9 pin serial interfaces.
Data transfer to a PC is made exactly the same as
described on the previous page concerning the transfer
of a report to a printer.
Transferring measurement values
Interfaces, Peripherals
To Next Page
Loading...