Epson USN 52R - Storing Measured Values - Data Logger; Determining the Number of FILES

To Next Page

To Previous Page

Krautkramer USN 52R/USN 52L Issue 05, 02/00 5-35

5.8 Storing measured values -

Data Logger

The Data Logger helps you to store and manage your

measurement results. These are saved even when the

batteries are removed. The stored measured values can

be:

• displayed

• deliberately deleted

• transferred to a peripheral

• output via a PC or printer

A number of measurements are compiled into one

“FILE”. To file measured values in the Data Logger you

must

• determine the required number of FILES

• select a FILE

Determining the number of FILES

You determine the total number of FILES (max. 99) –

the instrument automatically determines the number of

measurement locations according to the following for-

mula:

Number of measurement locations = 2500 : Number

of FILES

The first measured value of each FILE is automatically

allocated the number 1. However, you can also select

another measurement location. All the following mea-

sured values are consecutively filed until all measure-

ment locations are full or until you select another FILE

or measurement location.

H Note:

You can only determine the number of FILES when the

Data Logger is empty.

Storing measured values - Data Logger Operation