Epson USN 52R - Important Basic Settings; Set Language; Setting the Measurement Units

Krautkramer USN 52R/USN 52L Issue 05, 02/00 4-13
4.6 Important basic settings
Set language
In the LANGUAGE function in the second operating
level you can select the language in which the names
of the functions are to be displayed.
The following languages are available:
• German • Swedish
• English • Danish
• Italian • Norwegian
• French • Finnish
• Spanish • Dutch
• Portuguese • Russian
Operation:
– Change to the second level with X.
– Select the left-hand function table with T V.
– Highlight the left function group with C.
Important basic settings Basics of operation
– Set the required language in the LANGUAGE
function with N or O.
– You will return to the first operating level with X
or F.
Setting the measurement units
In the function MEAS. UNITS in the second operating
level you can determine the measurement units in
which you wish to operate the instrument (mm or
inches).
Operation:
– Change to the second operating level with X.
– Select the left-hand function table with T V.
– Highlight the left function group with C.
– Using N or O in MEAS. UNITS set the required
units.
– You will return to the first operating level with X
or F.
Krautkramer USN 52R/USN 52L Issue 05, 02/00 4-13
4.6 Important basic settings
Set language
In the LANGUAGE function in the second operating
level you can select the language in which the names
of the functions are to be displayed.
The following languages are available:
• German • Swedish
• English • Danish
• Italian • Norwegian
• French • Finnish
• Spanish • Dutch
• Portuguese • Russian
Operation:
– Change to the second level with X.
– Select the left-hand function table with T V.
– Highlight the left function group with C.
Important basic settings Basics of operation
– Set the required language in the LANGUAGE
function with N or O.
– You will return to the first operating level with X
or F.
Setting the measurement units
In the function MEAS. UNITS in the second operating
level you can determine the measurement units in
which you wish to operate the instrument (mm or
inches).
Operation:
– Change to the second operating level with X.
– Select the left-hand function table with T V.
– Highlight the left function group with C.
– Using N or O in MEAS. UNITS set the required
units.
– You will return to the first operating level with X
or F.