Epson USN 52R - User Manual

USN 52R / USN 52L
Technical Reference and Operating Manual
Ident No. 28 642
Please unfold the inside page.
All function groups and tables are illustrated there enabling you to quickly find instrument functions whilst reading
this manual. You will also find an overview of status symbols.
This issue 05, 02/00, applies to the following software version:
R5 TCG/DGS
R6 TCG/DGS
L4 TCG/DGS
L5 TCG/DGS
Subject to change without notice.

Summary

1. Introduction

1.1 Safety information

Essential safety precautions for operating the USN 52R/USN 52L instruments.

1.2 Important notes

Key considerations before using the USN 52R/USN 52L to ensure accurate test results.

1.3 USN 52 R;USN 52 L

Overview of the operating concepts and differences between the USN 52R and USN 52L models.

1.4 Remarks on this manual

Information regarding the manual's structure and how to use it effectively.

2. Standard package and accessories

2.1 Standard package

Lists the components included in the standard package for the USN 52R/USN 52L.

2.2 Required accessories

Details the essential accessories needed for the operation of the instrument.

2.3 Recommended accessories

Lists accessories that are suggested for optimal use of the instrument.

2.4 Recommended outside products

Lists external products tested and recommended for use with the instrument.

3. Setting into operation

3.1 Positioning the USN 52 R;USN 52 L

Guidelines for proper placement of the instrument considering ambient conditions.

3.2 Power supply

Information on ensuring adequate power for instrument operation via batteries or mains.

4. Basics of operation

4.1 USN 52 R and USN 52 L

Overview of the operating concepts and differences between the USN 52R and USN 52L models.

4.2 Display

Explanation of the instrument's display modes, including A-scan and functions.

4.3 Operational concept

Describes the two-level operating structure and navigation within the instrument's functions.

4.6 Important basic settings

Covers essential initial configurations like language and measurement units.

5. Operation

5.1 Function overview (first operating level)

Provides a summary of functions available at the primary operating level.

5.2 Adjustment of the USN 52 R;USN 52 L

Details the various adjustment parameters and settings for the instrument.

5.3 USN 52 R;USN 52 L calibration

Explains the procedures for calibrating the instrument for accurate measurements.

5.7 Measuring thickness

Instructions for performing thickness measurements using the instrument.

5.8 Storing measured values - Data Logger

Guidance on using the Data Logger to store and manage measurement results.

5.11 Setting the RS232 interface

Configuration steps for the serial RS232 interface for data transfer.

5.12 Setting the flaw location calculation

Procedures for automatically calculating flaw location using angle-beam probes.

6. Documentation

6.1 Printing instrument settings and display contents

Instructions for printing instrument configurations and current display information.

6.2 Documentation with the PC program UltraDOC

Guidance on using the UltraDOC software for data management and remote control.

7. Servicing and maintenance

7.1 Cleaning the USN 52 R;USN 52 L

Procedures for cleaning the instrument and its accessories.

7.2 Maintenance of NiCd cells

Guidelines for charging and maintaining the instrument's NiCd batteries.

8. Interfaces, Peripherals

8.1 Interfaces

Details on the instrument's serial interface (RS 232) and its output capabilities.

8.2 Connection of a peripheral

Instructions for connecting external devices via the RS 232 interface.

8.5 Transferring measurement values

Explains how to transfer measurement data from the Data Logger to a PC.

9. Specifications

10. Appendix

10.1 Function directory

A comprehensive list and brief description of all instrument functions.

10.3 Service addresses

Contact information for authorized service centers and representatives.

11. Changes

12. Index

1. Introduction (DGS)

1.1 How to measure with the DGS

Explains the DGS option for comparing natural flaw reflecting power with theoretical reflectors.

1.2 Overview of the method of proceeding

Outlines the procedure for using the DGS method, including reference echo recording.

2. Overview of the DGS menu

2.1 DGS mode

Details how to activate and switch between DGS and TCG modes for measurement.

3. Operating the DGS

3.1 Storing a new probe

Instructions for programming and storing probe parameters for DGS measurements.

3.2 Preparing the DGS evaluation

Covers essential adjustments required before performing a DGS evaluation.

3.3 Carrying out a DGS evaluation

Steps involved in conducting a DGS evaluation by comparing natural and theoretical reflectors.

4. Codes for remote control

Epson USN 52R Specifications