Epson USN 52R - 4. Basics of operation; 4.1 USN 52 R and USN 52 L; 4.2 Display; 4.3 Operational concept

To Next Page

To Previous Page

Krautkramer USN 52R/USN 52L Issue 05, 02/00 0-3

Index

Storing data .............................................. 5-14

Clearing the instrument setting..................5-15

Clearing all data ........................................5-16

Displaying stored A-Scans (preview) .........5-16

5.3 USN 52R/USN 52L calibration ................5-17

Calibration of display range .......................5-17

Calibration with a straight-beam probe .......5-18

Calibration with angle-beam probes ........... 5-20

Calibration with a dual (T/R) probe ............5-21

Automatic calibration ................................5-22

Preparing the instrument for

digital measurement ..................................5-23

Calibrating the sensitivity .......................... 5-24

5.4 DAC/TCG ..................................................5-25

Function group TCG ..................................5-26

5.5 Recording a Distance-Amplitude

Curve .......................................................5-28

5.6 Echo evaluation with DAC/TCG .............. 5-31

DAC mode ................................................5-32

TCG mode ................................................5-33

5.7 Measuring thickness ...............................5-34

5.8 Storing measured values - Data Logger 5-35

Determining the number of FILES .............5-35

Selecting a FILE .......................................5-36

Clearing FILES ......................................... 5-37

Storing measured values .......................... 5-37

Viewing stored readings ............................5-38

Clearing the measured values ...................5-38

5.9 Configuring the USN 52R/USN 52L ........ 5-39

5.10Data set names ........................................5-50

5.11Setting the RS232 interface .................... 5-57

5.12Setting the flaw location calculation ......5-59

Displaying the measured values ...............5-61

Automatic calibration ................................5-62

5.13Setting the measurement methods ........ 5-62

5.14Locking set values .................................. 5-64

5.15Function check ........................................5-64