131
Note: See the Help information in Document Capture Pro or Document Capture for details.
4. If you want to assign scan jobs to the selection list on the product control panel, do one of the
following:
• Windows: Click Event Settings.
• Mac: Click the icon at the bottom of the window, then click Event Settings.
5. Select the jobs that you want to assign to any of the pull-down menus.
You can now use the added scan jobs when you scan from the product control panel.
6. Click OK, then click OK again.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Scanning with Document Capture Pro or Document Capture
Control Panel Scanning Options
Select the options you want to use for scanning.
To Next Page
Loading...
