Epson WF-5690 Series - FFC and Cable Routing (cont.); 2 nd Cassette Housing Assembly Cable Routing

Epson WF-5690/4640/4630/5620/5190/5110 series Revision D
Disassembly/Reassembly Routing FFCs/Cables 49
Confidential
2nd Cassette Housing Assy
*
 Insert the ferrite core of the ASF Motor cable into the hole A of the 2nd Cassette Housing Assy, and route the cable through the hooks and ribs as shown above.
 Insert the ferrite core of the ASF Encoder cable in the hole B of the 2nd Cassette Housing Assy, and route the cable through the hooks and ribs as shown above.
 When connecting the Paper Stopper Lever Sensor cable to the ASF Encoder Board, follow the procedure below.
1. Route it through the groove A of the 2nd Cassette Housing Assy, and then route it through the hook and ribs as shown above.
2. Pull it out from the hole C of the 2nd Cassette Housing Assy, and route it through the groove B of the 2nd Cassette Housing Assy.
Bottom
Paper Stopper Lever Sensor cable
Groove AHole C
2nd Cassette Housing Assy
ASF Motor cable
ASF Encoder
cable
Hole A
Ferrite core
Route this outside rib.
Left
ASF Motor
ASF Motor cable
ASF Encoder cable
Relay connector
Ferrite core
Hole B
Front
Rear left
Paper Stopper
Lever Sensor cable
Groove B
Groove B
Hole C
ASF Encoder Board
Hook
Rib
ASF Motor cable and ASF Encoder cable
ASF Encoder cable
Connect to Relay
connector
ASF Motor cable
Connect to
connector on ASF
Encoder Board
ASF Motor